BTVTY - 857 7611 COLOREDGE 1560/1565 CYAN DEVELOPER,500 GMS
- MSDS: BTVTY
- Manufacturer: CANON INC
- Product Name: 857 7611 COLOREDGE 1560/1565 CYAN DEVELOPER,500 GMS
- National Stock Number: 6750-00D003352
Product Identification
Product ID:857 7611 COLOREDGE 1560/1565 CYAN DEVELOPER,500 GMS
MSDS Date:05/21/1997
FSC:6750
NIIN:00D003352
MSDS Number: BTVTY
Responsible Party
TOKYO
US
Emergency Phone: 716-722-5151
Info Phone: 716-722-5151
Preparer: NONE
Cage: S5612
Contractor
Telephone: 800-828-6203
Cage: 5K871
Ingredients
1) (CUPRIC OXIDE)
CAS: 1317-38-0
RTECS: GL7900000
Fraction By Weight: <15%
ZINC OXIDE
CAS: 1314-13-2
RTECS: ZH4810000
Fraction By Weight: <15%
OSHA PEL 10 MG/M3 TDUST
ACGIH TLV: 10MG/M3 TDUST; 9394
IRON OXIDE
CAS: 1309-37-1
RTECS: NO7400000
Fraction By Weight: 90-95%
OSHA PEL 10 MG/M3 (FE)
ACGIH TLV: 5 MG/M3(FE),B2; 939
POLYESTER RESIN
CAS: 39382-25-7
Fraction By Weight: 3-10%
PIGMENT (TRADE SECRET, REGISTRATION NO. 80100185-5013P)
Fraction By Weight: <1%
Hazards
LD50 LC50 Mixture:ORAL LD50 (RAT) IS UNKNOWN.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION EXPECTED TO BE A LOW HAZARD
FOR RECOMMENDED HANDLING. EYE CONTACT MAY CAUSE TRANSIENT
IRRITATION. EXPECTED TO BE A LOW SKIN CONTACT HAZARD FOR
RECOMMENDED HANDLING. EXPECTED TO BE A LOW ING ESTION HAZARD.
Explanation of Carcinogenicity:THIS COMPOUND CONTAINS NO INGREDIENTS AT
CONCENTRATIONS OF 0.1% OR GREATER THAT ARE CARCINOGENS OR SUSPECT
CARCINOGENS.
Effects of Overexposure:EYES: IRRITATION.
Medical Cond Aggravated by Exposure:PERSONS WITH A SKIN DISORDER MAY BE
AT INCREASED RISK FROM CONTACT WITH THIS PRODUCT.
First Aid
First Aid:EYES: ANY MATERIAL THAT CONTACTS THE EYES SHOULD BE WASHED
OUT IMMEDIATELY WITH WATER. GET MEDICAL ATTENTION IF SYMPTOMS
OCCUR. SKIN: WASH AREA WITH SOAP AND WATER. GET MEDICAL ATTENTION
IF SYMPTOMS O CCUR. INHALATION: IF SYMPTOMATIC, MOVE TO FRESH AIR.
GET MEDICAL ATTENTION IF SYMPTOMS PERSIST. INGESTION: DRINK 1-2
GLASSES OF WATER. GET MEDICAL ATTENTION.
Fire Fighting
Flash Point:COMBUSTIBLESOLID
Lower Limits:NOT GIVEN
Upper Limits:NOT GIVEN
Extinguishing Media:COMBUSTIBLE SOLID. USE WATER SPRAY, CARBON DIOXIDE,
DRY CHEMICAL.
Fire Fighting Procedures:WEAR FIRE FIGHTING PROTECTIVE EQUIPMENT AND A
FULL FACED SELF CONTAINED BREATHING APPARATUS. FIRE OR EXCESSIVE
HEAT MAY PRODUCE HAZARDOUS DECOMPOSITION PRODUCTS
Unusual Fire/Explosion Hazard:POWDERED MATERIAL MAY FORM EXPLOSIVE
DUST- AIR MIXTURES.
Accidental Release
Spill Release Procedures:DO NOT USE A VACUUM CLEANER TO CLEAN UP SPILLS
OF POWDERED DEVELOPERS AND TONERS. THE VERY FINE PARTICLES CAN
CAUSE A FIRE OR EXPLOSION. SWEEP MATERIAL ONTO PAPER AND PLACE IN A
FIBER CARTON. AVOID GE NERATION OF DUST.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP CONTAINERS CLOSED. AVOID
BREATHING DUST. USE WITH ADEQUATE VENTILATION. WASH THOROUGHLY
AFTER HANDLING.
Other Precautions:LOW HAZARD FOR RECOMMENDED HANDLING. MINIMIZE DUST
GENERATION AND ACCUMULATION. REFER TO NFPA PAMPHLET NO.
654,"PREVENTION OF FIRE AND DUST EXPLOSIONS IN THE CHEMICAL, DYE,
PHARMACEUTICAL, AND PLASTIC S INDUSTRIES".
Exposure Controls
Respiratory Protection:NONE NORMALLY REQUIRED.
Ventilation:GOOD VENTILATION (4-6 ROOM VOLUMES/HR) SHOULD BE USED.
VENTILATION RATES SHOULD BE MATCHED TO CONDITIONS.
Protective Gloves:IMPERVIOUS GLOVES WHEN HANDLING POWDER.
Eye Protection:MINIMIZE EYE CONTACT AS NEEDED.
Other Protective Equipment:PROVIDE WASHING FACILITIES.
Work Hygienic Practices:WASH AFTER HANDLING AND BEFORE EATING,
DRINKING, OR SMOKING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:NOT GIVEN
Melt/Freeze Pt:M.P/F.P Text:212 TO 302F
Vapor Pres:NEGLIGIBLE
Vapor Density:NOT GIVEN
Spec Gravity:4.0-5.0
Evaporation Rate & Reference:NEGLIGIBLE
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BLUE SOLID POWDER. SLIGHT ODOR.
Percent Volatiles by Volume:NIL
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
OXIDES OF IRON.
Conditions to Avoid Polymerization:WILL NOT OCCUR.
Disposal
Waste Disposal Methods:DISPOSE OF WASTE IN ACCORDANCE WITH LOCAL, STATE
AND FEDERAL REGULATIONS. INCINERATE OR LANDFILL IF PERMITTED.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.